Switching Relays

Pneu Div Relay Mod SPDT 3-20# Schneider Electric (Barber Colman) PNEUMOD.DIVERTING RELAY,3/20# Diverting Relay Close Differential. Snap acting SPDT Switch Set Point Adjustable 3 To 20 PSI. Differential Set At 0.3 PSI. Pneumodular Mount. Factory #R503-1.

Div Relay SPDT Dif 2 to 4 PSI * Diverting Relay. Snap Acting SPDT Switch set Point Adjustable 3-20 PSI. Differential Set at 3.0 PSI. Pneumodular Mount. Factory #R503-2.

DIVERTING RELAY SPDT 18-22#SW * Pneumatic diverting relay spdt range 18-22psi below 18psi, no & c are connected. Above 22 psi nc & c are connected.includes mounting strap & adhesive backed mounting base

Diverting Relay DPDT 4-8# Sw * Diverting Relay. Snap Acting DPDT Switch. Non Adjustable With 4 PSI Differential. Pneumodular Mount. Factory #R503-3 and #R504-3.

Diverting Relay DPDT 18-22#Sw * Pneumodular Diverting Relay. Range 18-22DPDT. Below 16# No & C NO2 & C2 Are Connected. Above 20# Nc & C NC2 & C2 Are Connected.

Switching Relay * Three Way Switching Relay. Pilot Signal Switches Com From No To Nc. Adjustable Setpoint 0 To 25 PSI. Diff 1.5 PSI. Factory Set At 9 PSI.

Multipurpose Relay * Multi-purpose relay. Direct or reverse acting, amplifying, signal advancing, minimum pressure relay and lower pressure transfer.

1/2 Air Switching Valve Three Way Switching Valve. 1/2 FPT Spring Range 8-13 PSI. replaces VP519C1006

Two position cumulator converts a proportional input to two position. Adjustable cut in and cut out. Factory set approx 9 PSI cut in. Cut out 8.5 PSI.

High Pressure Relay

Diverting Relay * Diverting Relay Adjustable Above Set- Point C & NO Connected; Below Set Point C & NC Connected. Use To Feed/Exhaust A Circuit.

Diverting Relay with bracket * Diverting relay adjustable above set point C & NO connected; Below set point C & NC connected. Use to feed/exhaust a circuit. Includes bracket