Pressure Transducers

Pressure Differential DLP (0.5% Accuracy) 1", 2", 5", 10" (uni/bi) Display Standard REPLACES: A/LP2-3-20-LCD

W/ Enlosure Pressure transducer 0-15 PSI. Supply 8-30 VDC. Output 4-20 mA. 1/4-18 NPT connection. Operating Temp -40 to 221F. Burst pressure 45 PSI. Stainless steel. Wiring harness A/GP must be ordered separately.

Wet to Wet Differential Pressure Transducer w/ DISPLAY, two solid state pressure transducers with 20' leads. 100 psi range selectable 10,25,50,100psi. Output 4 -20mA, 0-5vdc or 0-10vdc.

Pressure transducer 0-200 PSI (0-13.8 Bar) 4-20 mA output linear with pressure. INCH NPT mounting. Screw terminal connections and conduit adapter cover.

Pressure transducer -14.7 to 25 psi (-1013-1720 mb) 4-20 mA output linear with pressure. 1/4 MPT connection. Screw terminal connections and 1/2 inch conduit adapter cover.

Pressure transducer, 0-300 psi (0-13.8 Bar), 4-20 mA output linear with pressure. 1/4 NPT mounting. Supply voltage 9-30 VDC. Screw terminal connections and conduit adaptor cover.

Pressure, Transducer, 0-0.5"wc Pressure Range, Unidirectional, 1/4" Push-on Barb Fitting Process Connection, 0-5Vdc Output Signal, Plus/Minus 0.5% Accuracy, Low Differential Pressure Transducer with IP67-rated housing

Dry Differential Pressure / Velocity Transducer, Panel Mount, Range: 0-1"W.C./0-250Pa 0.1/0.25/0.5/1.0 in. WC FS, switch selectable. When selecting bi-directional the sensing range is both positive and negative centered around zero.

Dry Differential Pressure / Velocity Transducer, Panel Mount, Range: 0-10"W.C./0-2.500kPa 1.0/2.5/5.0/10 in. WC FS, switch selectable REPLACES: EPP102

Transducer 150 PSI 4-20mA * Pressure transducer. Single input range 0 to 150 PSI. Output 4 to 20 mA. Supply voltage 9.5 to 30 VDC. 1/4 NPT connection. 2 wires with 3 meter cable. Operating temp -40 to 257F. Proof pressure 450 PSI, Burst pressure 1500 PSI. DISCONTINUED

Pressure transducer 500# 4-20 * Pressure transducer. 0-500 PSI. 2 wire loop powered, 9.5 to 30 VDC. Output 4-20 mA. 1/4 SAE female Schrader connection. 3 meter cable. DISCONTINUED

Panel mount pressure sensor has ± 0-1", 0-2", 0-5", 0-10" w.c. selectable pressure range with display REPLACES: P7640A1026

Differential static transducer * Differential pressure transducer. 12-40 VAC/DC. Enclosure mounted, 1/4 inch barb connections. Range 0-5, 0-2.5, 0-1.25, -2.5 to 2.5, -1.25-1.25 or -.625 to.625 inches WC. Output 0-5 or 0-10 VDC.

Diff press trans 10/20/5/100# * Wet to wet differential pressure transducer. input 12-30 VDC or 24 VAC. Range 0-10/20/50/100 PSID. Output 0-5V, 0-10VDC or 4-20mA. LCD display and LED indication. 1/8 FPT connections