Spring Return

Direct Coupled Valve Actuator. 24 Volts 2-10Vdc & 4-20Ma. 3/4 Stem Travel. 135 Lb Force. Springs Stem Down On Power Failure

Direct Coupled Valve Actuator Spring return up on power loss 24v powrd; signal 0-10 or 2-10vdc 3/4 Stroke, Torque=135#

Direct Coupled Actuator 24 volts 35 in lb torque 2-10 volt input Direct Mount

MS51-7103-150 Valve actuator 0-10 SR * Valve actuator for VB7XXX valves up to 2 and VB9XXX up to 1-1/4 inches. 24 volts spring return. Input 2-10 VDC. 105 lbs force. 60 seconds timing. 6.6 VA. Plenum cable connection.

MS51-7103-100 Direct Coupled Valve Actuator. 24V Spring return. Input 2-10Vdc. 105 # stem force 1/2 inch stroke. For VB7XXX 1/2 to 2 inch valves.

MS51-7103-140 Dir Coup Act VB7XXX 6-9V SR * Direct Coupled Valve Actuator. 24V Spring return. System 8000 compatible with 20VDC power supply. Input 6-9 VDC. 105 # stem force 1/2 inch stroke. For VB7XXX 1/2 to 2 inch valves. Plenum Cable.

Dir Coupled Valve Act 24V SR * Direct coupled valve actuator for 2-1/2 to 4 VB9XXX valves. 24V Spring return. Max stem force 495 lbs. 1-1/16 stroke.Manual override, 2-10VDC or 4-20Ma with addition of 500 ohm resistor.

Ball valve actuator. Floating, 90 sec, fail in place.

Ball Valve Actuator, 24 Vac/Vdc, Modulating Control Signal, Fail in Place ( Non Spring Return ), 90 Second Timing, Nema 2 Enclosure, Standard Profile

Direct coupled valve actuator. 24 volts spring return. 0-10 or 4-20 mA input. 3/4 inch stroke. 225 lbs force. Used with 599 Flowrite valves.

Valve actuator 0-10VDC SR 24V * Direct coupled valve actuator for VG7000 series valves 1/2 to 1-1/2 NPT. 24 volts spring return stem up. Input 0-10, 2-10, 6-9 VDC or 0-20, 4-20 mA direct or reverse acting. 61 lbs torque. 12 VA power consumption. Manual override. Max operating tempe

Valve Actuator 24V SPDT