Ignition Controls

Fenwal Ignition Control+ 35-725911-117 Fenwal Gas Ignition Controls 120v DSI 3TRY 15sPP 15sTFI

Ignition Cable 36 For S86 Y86 * 36 Ignition Cable With Booted Ends. One End Straight One Angled.

Igniter/Sensor for S86 Y86 * Igniter-Sensor Assembly. Includes Ground rod And Adaptor.

Conversion Kit, Single Stage Natural Gas to LP Gas, 8"-12" Adjustment Range, Includes Regulator Spring, O-Ring, Screw and Cap, Used with VR8200, VR8300, VR8104, VR8204, VR8304, VR8205 ( Not the VR8205S ), VR8305, VR4200, VR4300, VR4204, VR4304, VR4205 and VR4305 Series, Standard and Slow Opening Valves, Not for Use with Step Opening Valves

30 inch Ignition Cable For S8600 Controls. 1 Angle Boot End One 1/4 Stake-On End.

Ignition Wire 25' * Ignition Wire 25 Feet. 15000V. Ambient Temperature -40F To +170F. Replaces GTO-15.

Red Silicone Wire Ul (Per Ft) Withstands higher than 10,000 volts AC and 25,000 volts DC with low current leakage. 16 Gauge 19x 26 stranded nickel plated wire. Temp Range -65 TO 482F. Captiveaire 13100 Replaces RSW.

Trane OEM Direct Replacement Control kit for Silicon Carbide (120V ignitor) applications. replaces Trane CNT02789, CNT02891, CNT03799, D341122P01, D341235P01, D341235P03 modules.

Furnace- Ignition/Fan Control Board NEW-Drop In Direct Replacement Ignition Control For Goodman 0130F00005, 0130F00005S, B1809926, B1809926S, PCBBF110, PCBBF110S, PCBBF112, PCBBF112S, PCBBF123, PCBBF123S , White-Rodgers 50T55-289 & 50A55-289

Universal Hot Surface Ignition/Fan Control Module. Replaces Numerous 50A50 And 50A55 Controls. Selectable Fan Timings. Self-Diagnostic. Hum/Eac /Inducer/Blower/Safety Circuits. 24Vac.

York OEM Direct Replacement kit for single stage York integrated furnace controls. Replaces virtually all York single stage HSI controls w/ 120 volt ignitors. Replaces York 265901, 265902, 539617, S1-03100662000, S1-03101250000, S1-03101266000, S1-03101267000, S1-03101267001, S1-03101284000, S1-03101933000, S1-03101972000, S1-03101973000, S1-03109167000, S1-33102956000, S1-33103010000

Trane OEM Direct Replacement Control Module kit forsingle stage Nitride (80V ignitor) applications. Replaces TraneCNT03076, CNT03798, CNT05164, CNT05165, D341213P01, D341396P01, D341396P03, D3413986P04, D341396P05.