Flame Safeguard Controls

Rectification Amplifier 0.8 Sec Response use With RM7800 Controllers And Flame Rods Or Photo Cells. Color Code Green. Territory restrictions apply, verify address before shipping

Rectification Amplifier 3 Sec Response. Use With RM7800 Controllers And Flame Rods Or Photo Cells. Also Use With C7012A Or C7012C Ultra Violet Detectors. Color Code Green. Territory restrictions apply, verify address before shipping. When using this amplifier with RM7890A, you must clip jumper JR2

Rectification Amplifier With Dynamic Self Check. 3 Second Flame Response. Use With RM7800 Series Controller And A C7012 Flame Rod Or A UV Purple Peeper. Territory restrictions apply, verify address before shipping

UV AMPL 0.8 OR 1.0 SEC * Ultraviolet amplifier for RM7800 & R7140 burner controls. FFRT .8 or 1 second. Territory restrictions apply, verify address before shipping

Ultraviolet Amplifier. 3 Sec. Flame Response With RM7800 Series Controller And C7027 Or C7035 Ultraviolet Scanner. Color Code Purple. R7849A1098

Amplifier 3 Sec/visible Light Optical scanner for use with C7927 and C7962 Flame Detectors.

Infrared amplifier for C7915 infrared scanners

Dynamic Self Check Amplifier * RM7800 amplifier for use with C7061 ultraviolet dynamic self check scanners

Oil Safety Control 45 Sec * Oil Burner Safety. Intermittent Ignition safety Switch Timing 45 Sec. 7.4A @ 120V3.7A @ 240V. Order C554A Cad Cell Sep. Thermostat Circuit .2A @ 24V. With Lockout Alarm Light.

Protectorelay * Same As R8184G1138 Except Provides Power For Low Voltage Cooling Control Circuit.

FSG Programmer L/Display Mod * Honeywell Microprocessor Burner Control. For Automatic Single Burner Systems. Replaces The R4140L. Order Amplifier Purge Timer And Base Separately. Optional Keyboard Display Available. Territory restrictions apply, verify address before shipping

Automatic Primary Control with Programmable Post Purge, For Automatically Fired Gas, Oil or Combination Fuel Single Burner Applications, 120Vac, Selectable Pilot, Delayed Main Valve, 4 Second or 10 Second Pilot Flame Establishing Period, Preignition, Selectable Interlocks, Nonvolatile Memory, 5 Second MFEP, -40-140 Degree Ambient Temperature Range, Selectable Recycle or Lockout on Loss of Airflow or Flame, Shutter Drive Output

Display and diagnostic tool w/ enhanced capabilities for RM7800 controls.

MODBUS DATA CONTROLBUS MODULE

Remote Reset Module * Remote Reset Module. Serves As A Link Between The RM7800 Controller And A Remote Mounted Push Button. The Button May Be Located Up To 1000 Ft From The RM7800 Controller. Territory restrictions apply, verify address before shipping

Pre-Purge Timer 2 Sec * Pre-Purge Timer. 2 Seconds. Use With RM7800 Series Controller. Territory restrictions apply, verify address before shipping

Pre-Purge Timer 10 Sec. * Pre-Purge Timer. 10 Seconds. Use With RM7800 Series Controller. Territory restrictions apply, verify address before shipping

Pre-Purge Timer 30 Sec. * Pre-Purge Timer. 30 Seconds. Use With RM7800 Series Controller. Territory restrictions apply, verify address before shipping

Pre-Purge Timer 60 Sec. * Pre-Purge Timer. 60 Seconds. Use With RM7800 Series Controller. Territory restrictions apply, verify address before shipping

Pre-Purge Timer 90 Sec * Pre-Purge Timer. 90 Seconds. Use With RM7800 Series Controller. Territory restrictions apply, verify address before shipping

Pre-purge Timer 2.5 Minutes

6 Minute Purge Timer For Use W/RM7800 FSG Controllers. Territory restrictions apply, verify address before shipping

Ultraviolet Scanner 3' Lead Length. 1/2 NPT. Use With C D E & M Series

Ultraviolet Scanner 6' Lead Length. 1/2 NPT. Use With C D E & M Series