Electronic and DDC Systems

Discharge air sensor. 8" duct mount. Networked 10 foot leads with metal enclosure

TEMPERATURE ONLY NO DISPLAY SA BUS SENSOR

Wall mount network sensor with LCD display. Temperature, Humidity, CO2 and PIR occupancy sensor.

Micro USB to USB 2.0 Cable Female USB 2.0 to Male Micro USB for use on compatible mobile device with OTG function. The Plug and Play allows you to use a mouse, a keyboard, a flash drive or a card reader on the compatible mobile device. Compatible w/ USB 2.0 & 1.1 Devices, operating systems Android 2.3 or above with OTG function., high speed 480 Mbps. For use with PROLON Network Manger to establish connection with Android mobile devices.

Electronic Proportional Plus Integral Pressure Control 0-10 Vdc Or 0-20 Ma 0.025 - 0.25 W.C. Da/Ra Selectable Order DpT2640-3 Sensor Separately.

Pressure transducer. 0-500 PSI 4-20mA 1/8" MNPT

PEARL Economizer and Demand Ventilation Controller, 24VAC, 50mA. (w/ 3 sensors)

Pearl expansion module. Add 2 A/O to a Pearl Advanced Rooftop Controller with TC series thermostats. Outputs 0-10VDC, 2-10VDC, or 1-5VDC.

WATER LOOP CONTROLLER "Supply & Return Water Temp (10K therm), 1 Aux. Temp (10K Thermistor), 1 Aux. Digital Input" 1 x DO (heating), 3 X DO (cooling), 1 X AO (cooling)

Outdoor air sensor. 10K type 3 10KIII

NC2000 controller built into a NEMA 1 Enclosure with 10" Display mounted on panel door. Includes display power supply, terminal strip for all external connections and panel wiring diagram Complete panel is UL508A Certified Panel Dimensions: 16"H x 12"W x 6"D NOTE: YOU ARE ONLY ALLOWED (1) NC2000 PER NETWORK

M2000 MUA Panel w/o network controller and w/o touch screen display.

DIGITAL RM SENSOR, LCD & TOUCHPAD

Wall plate w/ CO2 Sensor; can be added to TS200/TS250 to add CO2 after initial installation.

Wireless Power Control Module w/ 5- Dry Contact Relays. 120vac @ 15amp or 240/277vac @ 10amp

24 VDC power supply. 24VAC input, 1.5-28vdc output. Output current ratings 116mA@10vdc, 125mA @ 12vdc and 300 mA @ 24vdc.

PWM to Analog Voltage Output Interface Module. Input PWM relay, transistor or triac,various ranges, output 0-10vdc, requires 24 VDC or 24VAC power supply, 135mA.

Pressure to voltage or milliamp transducer. 24V AC/DC. Input 3 to 15 PSI, 2-10VDC, 1-5VDC, 3 to 15VDC or 4 to 20mA output. With gauge.

Spyder ILC VAV control with actuator. 24 volts, 9 VA. BACnet MS/TP communication. 6UI, 4 DI, 3 AO and 6 DO. Integrated actuator and pressure sensor..

Analog To Pressure Sgl Vlv Cnt

Relay module fan box control * Relay module for VAV fan powered induction boxes with 2 stages of reheat. 24 volts. Input 0-6 VDC from KMC solid state VAV controllers.

Relay 3 Stg Reheat 5001CSP * Three stage electric heat relay. 24 VAC. Input 0-10VDC.

Remote Thermostat (24 VAC Power) w/ built in wireless repeater.

Remote Sensor requires two AA batteries.