Damper And Valve Actuators

Internal Auxiliary Switch For Mod IV Motors. 1 SPDT Switch Rated At 7.2A @ 120V 3.6A @ 240V.

Internal Auxiliary Switch Kit For Mod IV motors. 2 SPDT Switches Rated For 7.2A @120V 3.6A @ 240V.

Adaptor Bracket for Mod IV * Adaptor Bracket For Mod IV Motors. Raises Motor 3/4 To Match Shaft Height Of Older Mod Motors.

Crankarm for Mod IV Motors * Infinitely adjustable crank arm.Can rotate through downward position without adaptor base.

ML6984/7984 feedback & switch * Position feedback and SPDT auxiliary switch for Honeywell ML6984 and ML7984 valve actuators. Feedback 2-10 VDC or 4-20mA, reversible signal. SPDT switch rated for 1A at 24 volts. Adjustable from 0 to 100% of valve stroke.

Manual Potentiometer * 135 Ohm Replacement Potentiometer For Most Manual Potentiometers.

Motor Shaft Ball Joint w/3/8 Thread x 5/16" Shaft BALL JOINT; HAS 3/8 FEMALE #16 THREADEDEND, SEPERATED BY THE BALL JOINT, THE OTHER END ACCOMMODATES A 5/16 PUSH ROD,ON THE END, PARALLED TO SHAFT. THREADS ONTO THE END OF THE ACTUATOR'S SHAFT.

Shaft Adaptor 3/4-1/2 * Short shaft adaptor for use with all dampers and actuators

%%%DAMPER SHAFT EXTENSION %%% * Damper shaft extension

Neman 3 Weatherproof Kit/Modiv * Modutrol IV Weatherproof Kit. Provides Neman 3 Level Protection To All Mod IV Motors.

EXTENSION/ ML6161 AND ML7161 * 2 inch shaft extension and mounting strap for ML6161

24/120/230 Vac internally mounted transformer for Honeywell series 2 Modutrol motors