Shop by Category

Multi Function VAV Control * Multi function VAV control. Can be configured direct or reverse acting, normally open or closed.. 0 to 2 range; field adjustable 8 PSIg start; with bracket (high flow)

Pressure independent VAV control and actuator. 24 volts, 4VA. 50 in/lb torque, 90 degrees rotation at18 degrees per minute. Reset voltage 0-10 VDC. 0-3300 FPS. Direct couple to 1/2 inch shaft. Used with CTE-5100 series thermostats. KREUTER

Pneumatic DA 2 pipe stat * Pneumatic thermostat, 2 pipe direct acting. Range 55 to 85F, Throttling range 3 to 12.

Thermostat for CEP/CSP * Electronic thermostat for KMC CEP/CSP-4000 series controller actuators. DA cooling. Horizontal mount

Thermostat for CEP/CSP RA/DA * Electronic thermostat for KMC CEP/CSP-4000 series controller actuators. RA heating, DA cooling. Horizontal mount

Single setpoint VAV thermostat * Single setpoint, direct acting VAV room thermostat. 16 volts supplied from CSP VAV control. Output 0-10VDC. Range 55 to 85F. Proportional abnd 2 or 4F.

Dual setpoint, direct and reverse acting VAV room thermostat. 16 volts supplied from CSP VAV control. Output 0-10VDC. Range 55 to 85F. Proportional abnd 2 or 4F.

Room thermostat for KMC CSP-500X & REE-X000 systems. 16 VDC. Output 0-10VDC.Dual setpoint, Direct & reverse acting.

24 Volts & 0-12VDC Output Almond Thermostat. * Can Replace TP8101 Thermostat; Verify Application.

Wall Plate for AppStat for mountiong on 4x4 electrical box or horizontal electrical box mounting.

ALMOND BACK PLATE

Simply VAV Wallplate, white, 4.5" x 5.5", 8000 series sensors