Shop by Category

Subbase for RM7800 Burner Mt * Universal Wiring Subbase. For Wall Or Burner Mounting. Steel Frame With Knockouts In Back Top & Bottom For Conduit Connections. Use With RM7800 Series Controllers. Territory restrictions apply, verify address before shipping

TdX 20 (R-458A) R-22 replacement refrigerant w/ virtually identical capacity to R-22 and increased efficiency, compatible with mineral oil, 30 pound cylinder.

Flame Rod Wire 600V Rms Rod Lead Only 400F White Ignition Cable High Temp Wire

Honeywell R7824C1002 Rectification Flame Amplifier, Dynamic Self-Check, 3.0 Sec FFRT

Rectification Amplifier 0.8 Sec Response use With RM7800 Controllers And Flame Rods Or Photo Cells. Color Code Green. Territory restrictions apply, verify address before shipping

Rectification Amplifier 3 Sec Response. Use With RM7800 Controllers And Flame Rods Or Photo Cells. Also Use With C7012A Or C7012C Ultra Violet Detectors. Color Code Green. Territory restrictions apply, verify address before shipping. When using this amplifier with RM7890A, you must clip jumper JR2

Rectification Amplifier With Dynamic Self Check. 3 Second Flame Response. Use With RM7800 Series Controller And A C7012 Flame Rod Or A UV Purple Peeper. Territory restrictions apply, verify address before shipping

UV AMPL 0.8 OR 1.0 SEC * Ultraviolet amplifier for RM7800 & R7140 burner controls. FFRT .8 or 1 second. Territory restrictions apply, verify address before shipping

Ultraviolet Amplifier. 3 Sec. Flame Response With RM7800 Series Controller And C7027 Or C7035 Ultraviolet Scanner. Color Code Purple. R7849A1098

Amplifier 3 Sec/visible Light Optical scanner for use with C7927 and C7962 Flame Detectors.

Infrared amplifier for C7915 infrared scanners

Dynamic Self Check Amplifier * RM7800 amplifier for use with C7061 ultraviolet dynamic self check scanners

Slate Digital I/O Module. Universal Digital Input and Output Module with up to 14 Opto relays.

Subbase For DIN Rail Mounting. required for all Modules Except Base Module.

Relay Spst Powerpile Rated Contacts. 24V Coil. 6Va

FSG Programmer L/Display Mod * Honeywell Microprocessor Burner Control. For Automatic Single Burner Systems. Replaces The R4140L. Order Amplifier Purge Timer And Base Separately. Optional Keyboard Display Available. Territory restrictions apply, verify address before shipping

Automatic Primary Control with Programmable Post Purge, For Automatically Fired Gas, Oil or Combination Fuel Single Burner Applications, 120Vac, Selectable Pilot, Delayed Main Valve, 4 Second or 10 Second Pilot Flame Establishing Period, Preignition, Selectable Interlocks, Nonvolatile Memory, 5 Second MFEP, -40-140 Degree Ambient Temperature Range, Selectable Recycle or Lockout on Loss of Airflow or Flame, Shutter Drive Output

Electic pneumatic switching relay. 120 volts. SPDT 1/4 inch barb fittings. EP

Pneu. Relay Higher Of Two * High Signal Selector. The Output Is Equal To The Highest Of Two Input Signals.

Snap Acting Relay * Snap Acting Relay. One Or Two Inlets With One Outlet. Adjustable 3 To 15 PSI. Differential 1 PSI

Pneumatic Switching Relay. SPDT. Change-Over Pressures 3 & 7 PSI. 5/32 Barb Connections. Mounting Clip Included.

Pneu Switching Relay * Pneumatic Switching Relay. SPDT. Switching Pressures 13 & 17 PSI. 5/32 Barb Connections.

Switching Relay. DPDT. Pneumatic Switching. Nc Ports Connected To Common On A Pressure Rise To 6 PSI. Switches Back No To Common At 4 PSI.

Relay DPDT * Switching Relay. Same As RP670B1009 Except Switching Pressures Are 16 And 14PSIg.