Humidity, Pressure And Flow Control

Hi Gas Pres Manual 12-60" manual reset, 1/4" FNPT conn., 8.5psi max w/ vent line, 7psi w/o vent line. Breaks NC-Com on a rise. Consider GMH-A4-4-6. Replaces C6097B1002

High gas pressure switch. Range 1 to 20 inches breaks on a pressure rise. Manual Reset. 1/4 FNPT mount. Maximum pressure 8.5psi w/ vent, 7psi w/o vent line.

Wall mounted humidity sensor provides a 2 to 10 VDC output in direct proportion to humidity in air. 10 to 40 % RH requires 16 to 28 VDC or 20 to 32 VAC.

Humidity sensor 4-20 mA * Humidity sensor. Range 10 to 90% relative humidity. 4 to 20 mA direct acting output. Two wire. Power supply 12 to 40 VDC.

3% Humidity-Temp 20k Sensor * Wall mount humidity sensor with 20K NTC temperature sensor. 18-40 VDC or 24 VAC supply. 0-10VDC, 0-5VDC or 4-20 mA output. 3%RH accuracy REPLACED BY: H7735A2012

Outdoor humidity sensor with 20K NTC temperature sensor. 18-40 VDC or 24 VAC supply. 0-10VDC, 0-5VDC or 4-20 mA output. 3%RH accuracy REPLACES: H7635C2015

Pressure Switch For Steam Air And Non- Combustible Gases. SPDT snap acting switch, 2-15 PSI range. Makes R to W and breaks R to B on pressure rise to setpoint. Adjustable differential 2-6 PSI Does not include siphon loop.

Pressutrol 5-50 PSI * Pressuretrol with non mercury snap acting switch. Range 5 to 50 PSI, Differential 6 to 14 PSI. !/4 NPT female connection. 8 amps at 120V Makes R to W and breaks R to B on pressure rise to setpoint.

Pressuretrol 20-300PSI SPDT Makes R to W and breaks R to B on pressure rise to setpoint.

Pressure control For Steam Air Water Or non-Combustible Gas. Range 10-150 PSI diff. 10-22 PSI. SPDT Snap Acting Switch Rating 8A @ 120V 5.5A At 240V. Does not include siphon loop.

2-15 PSI SPST MR High PSI Limit. Break on rise. 1/4 FPT Bottom Mt. 120/240 9.8/4.9 Amps. Max 25 PSI. Repl FOR: L404C1105, L404C1147.

Manual reset steam pressure limit control. Range 10 to 150 PSI. 2 SPST snap acting switched break on rise. Rating at 120/240 V 9.8/4.9 Amps. Max pressure 225 PSI. 1/4 NPT bottom mount