Direct Coupled Actuators

Adaptor Bracket for Mod IV * Adaptor Bracket For Mod IV Motors. Raises Motor 3/4 To Match Shaft Height Of Older Mod Motors.

Crankarm for Mod IV Motors * Infinitely adjustable crank arm.Can rotate through downward position without adaptor base.

ML6984/7984 feedback & switch * Position feedback and SPDT auxiliary switch for Honeywell ML6984 and ML7984 valve actuators. Feedback 2-10 VDC or 4-20mA, reversible signal. SPDT switch rated for 1A at 24 volts. Adjustable from 0 to 100% of valve stroke.

Motor Shaft Ball Joint w/3/8 Thread x 5/16" Shaft BALL JOINT; HAS 3/8 FEMALE #16 THREADEDEND, SEPERATED BY THE BALL JOINT, THE OTHER END ACCOMMODATES A 5/16 PUSH ROD,ON THE END, PARALLED TO SHAFT. THREADS ONTO THE END OF THE ACTUATOR'S SHAFT.

Shaft Adaptor 3/4-1/2 * Short shaft adaptor for use with all dampers and actuators

%%%DAMPER SHAFT EXTENSION %%% * Damper shaft extension

EXTENSION/ ML6161 AND ML7161 * 2 inch shaft extension and mounting strap for ML6161

Motor Crank Arm * Motor Crankarm For All Honeywell Mod IV Motors.

DCA 2Pos/Fltg 35In/Lbs 24V. * Direct Coupled Actuator. 24V 2 Position Or Floating Non-Spring Return. 35 In/Lbs torque 90 Sec Timing. 45/60/90 Degree Stroke.

Dir Coup Act 7 Min Timing * Direct Coupled Actuator. Floating Or Two position. 35 In/Lb Torque. 7 Minute Timing For VAV Applications.

Direct Coupled Actuator. 24V Floating Or two Position. 35 In/Lb Torque. 90 Second timing.

Actuator 24V 44# NSR 2 FLTG * Direct coupled actuator. 24 volts non spring return. Floating or 2 position. 44 in/lbs torque. 95 degree rotation, 95 second timing. 5 VA